How do I control the small platform truck? Now you just need to click on the button and the container is attached to the hook or not attached to the hook anymore. As soon as the cantilever is close enough to the container, the button turns yellow just like the other ones. The container is greyed out if the cantilever is too far away to take it up.
The “hook” symbol on the upper right next to the speed display allows you to attach or take down a container. swing the cantilever and also change its length. You can also combine two steps by sliding the button „diagonally“. By sliding the button up respectively down you can swing the cantilever back and forth, and by sliding the button to the right or left you extend or shorten the cantilever.
By using this button you can control the cantilever. Working Mode: On the lower left of the screen you can see a round button with a control cross after switching into the working mode. If you press the “break” button long enough you can drive backwards. The two buttons are activated as standard. You can also find two different versions for the „accelerator“ and the „break“ in the options menu: A slide control or 2 buttons, which you have to press.
Driving Mode: You can either control the vehicle by slide control or by tilting your device. To know in which mode the vehicle is, just look at its color: if it is in the driving mode the vehicle itself is yellow, if it is in working mode only the attachment is colored yellow. You can switch between these two modes by clicking on the round button showing the double arrow in the middle of the lower screen. This vehicle has 2 different modes: the driving mode and the working mode. Have fun! How do I control the skip loader? With just a little practice you can turn the driver’s cab, dig the shovel into the dirt and put the dirt into a container with just one fluent movement just like real excavator drivers. If you did not activate the euro control then the control crosses work the other way around. If you have activated the euro control in the “options” menu you open and close the joint up front by using the left control cross and by using the right control cross you move the whole cantilever arm up and down. In addition to that both of the control crosses have another function: namely moving the joint up front and the whole cantilever arm. By means of the left control cross you can move the driver’s cab to the right and left, by means of the right control cross you can open and close the shovel. At first it seems to be very complicated but it is just a question of practice. Therefore you use the two buttons on the left and right just like joysticks. Working Mode: To control the excavator completely you need two control crosses. If you slide both slide controls onwards (respectively backwards) the excavator goes forward (respectively backwards) if you operate only one slide control, only the according track will move and the excavator turns around accordingly. That’s why you control the left and right track separately by using a slide control. Driving Mode: The excavator is a track vehicle. To know in which mode the vehicle is, just look at its color: if it is in the driving mode the vehicle itself is yellow, if it is in working mode only the shovel is colored yellow.
0 kommentar(er)
